Coaster Designs's Workshop - Entry #8 - New Project!

  • 7 replies
  • 3519 views
*

Offline Coaster Designs

  • *
  • 224
  • RCT3 & NL2 Fanatic
    • View Profile
Coaster Designs's Workshop - Entry #8 - New Project!
« on: January 08, 2016, 08:07 AM »


Hey guys,

Welcome to the first entry made in NL2!
I made 4 others in RCT3, you can check them out here: http://www.shyguysworld.com/index.php/topic,17866.0.html





Entry #5 - Intamin Mega-Lite
This coaster is a small but fast paced ride and full of fun!

Statistics:
Max speed: 90 km/h
Max height: 36 m
Inversions: 0
Ride time: 0:59 min
Ride length: 676.5 m
Total Air time: 6 sec

Photos:




POV:


Thanks for watching!
- Coaster Designs
« Last Edit: October 17, 2016, 01:11 PM by Coaster Designs »

*

Offline Coaster Designs

  • *
  • 224
  • RCT3 & NL2 Fanatic
    • View Profile
Re: Coaster Designs's Workshop - Entry #5 - First NL2 entry!
« Reply #1 on: April 10, 2016, 10:14 AM »


Hey guys,

Here it is! Entry #6!

First, sorry for the lack of projects/updates! But I don't have any contests which I'm competing in so expect more soon!



Entry #6 - B&M Hyper

This entry is probably one of the biggest so far (isn't that hard with only 6 projects ofcourse :P). It is a B&M Hyper coaster, filled with lots of airtime. It is a littlebit inspired by Shambhala in Port Aventura and Fury325 in Carowinds.
I hope you like it!

Statistics:
Max speed: 135 km/h
Max height: 78,3 m
Inversions: 0
Ride time: 2:15 min
Ride length: 1570,8 m
Total Air time: 18 sec

Photos:




POV:


Would love some feedback!
- Coaster Designs
« Last Edit: April 10, 2016, 10:18 AM by Coaster Designs »

*

Offline Germs

  • *
  • 440
  • Respectable Punk
    • View Profile
Re: Coaster Designs's Workshop - Entry #5 - First NL2 entry!
« Reply #2 on: April 10, 2016, 11:21 AM »
It has a nice varied layout with very smooth transitions. I think the totally white background shrunk the coaster down a bit. Without any reference points, the drops didn't seem daunting and you didn't get a sense of speed.

*

Offline Coaster Designs

  • *
  • 224
  • RCT3 & NL2 Fanatic
    • View Profile
Coaster Designs's Workshop - Entry #7 - B&M Flying Coaster
« Reply #3 on: May 15, 2016, 02:35 PM »
It has a nice varied layout with very smooth transitions. I think the totally white background shrunk the coaster down a bit. Without any reference points, the drops didn't seem daunting and you didn't get a sense of speed.
Thanks! Yes I agree with you about this coaster in particular... The ride is really spread out, without any reference points it does make it less 'spectacular'.





Hey guys,

Entry #7 is here!



Entry #7 - B&M Flying Coaster

This ride was pretty hard for me to make, it is outside my confortzone as I have never made any inverted type coasters in Nolimits 2... I think it turned out pretty good!

Statistics:
Max speed: 81 km/h
Max height: 35,2 m
Inversions: 2
Ride time: 2:15 min
Ride length: 789,1 m



POV:


Sorry, I haven't had the time to make some decent pictures, but I wanted to upload this ride for you. I'll post them ASAP!

- Coaster Designs

*

Offline Tijjer

  • *
  • 413
  • The shed is verbolten
    • View Profile
Re: Coaster Designs's Workshop - Entry #5 - First NL2 entry!
« Reply #4 on: May 15, 2016, 06:47 PM »
The flying coaster is really nice!  And while I don't know much about roll speed I would say that its spot on similar to Air.   :up:  Also if you don't mind we should exchange notes sometime, I'm working on a BM hyper and would love to get some ideas on how you worked on the shaping!   


*

Offline Coaster Designs

  • *
  • 224
  • RCT3 & NL2 Fanatic
    • View Profile
Re: Coaster Designs's Workshop - Entry #5 - New Project!
« Reply #5 on: October 17, 2016, 01:11 PM »

Hey guys,

I am back and busy with a new coaster, a RMC.
I just finished the lay-out and the lifthill supports, but I couldn't wait to share it with you guys!
Here are the pictures:





The flying coaster is really nice!  And while I don't know much about roll speed I would say that its spot on similar to Air.   :up:  Also if you don't mind we should exchange notes sometime, I'm working on a BM hyper and would love to get some ideas on how you worked on the shaping!   
Sorry for not responding... I have been very busy this summer... Are you still working on it? We can still share notes, if you'd like!
Thanks for watching!
- Coaster Designs
« Last Edit: October 17, 2016, 01:14 PM by Coaster Designs »

*

Offline Tijjer

  • *
  • 413
  • The shed is verbolten
    • View Profile
Re: Coaster Designs's Workshop - Entry #8 - New Project!
« Reply #6 on: October 17, 2016, 05:05 PM »
Yes I have still been working on it now and then.

*

Offline Coaster Designs

  • *
  • 224
  • RCT3 & NL2 Fanatic
    • View Profile
Coaster Designs's Workshop - Entry #8 - RMC IBOX coaster RELEASED!
« Reply #7 on: November 14, 2016, 01:17 PM »

Hey guys!

Here is the RMC IBOX-track coaster!
I hope you like it!











And ofcourse the POV:
https://www.youtube.com/watch?v=T5dNdhpMWR8&feature=youtu.be&list=PL7TxAaUtzTW6VeSVKxSQv4zhDJMpBBNAJ

Thanks for watching!
-Coaster Designs



Yes I have still been working on it now and then.
Well, if you have any questions feel free to sent me a PM!
« Last Edit: November 14, 2016, 01:19 PM by Coaster Designs »